When considering load-bearing, it is important to take into account all objects and people that will exert pressure on the floor. Including but not limited to the load of equipment and furniture in the office, as well as the load that may be caused by the number of employees, appropriate flooring needs to be selected based on the number of employees. At the same time, it is also necessary to consider the characteristics of the office use and whether there will be gatherings of people to ensure that the floor will not be damaged or unstable due to gatherings of people during peak hours.

The load-bearing selection of large office buildings should be scientifically evaluated by professionals to select floors with better load-bearing levels.
MAJET's raised floor follows the CISCA standard for load-bearing classification. You can refer to the table below to select the appropriate load-bearing level.

1.Flexibility and Customization

One of the primary reasons architects and builders are turning to steel raised floors is their unparalleled flexibility. These floors allow for easy customization to meet the specific needs of a space, making them ideal for environments with evolving requirements, such as office spaces.
 

2.Accessibility and Maintenance

The space beneath steel raised floors, known as the plenum, serves as a concealed pathway for cables, electrical wiring, and ventilation systems. This not only streamlines the aesthetic appeal of the space but also facilitates easy access for maintenance and upgrades, minimizing downtime.
 

3.Improved Indoor Air Quality

Steel raised floors contribute to better indoor air quality by promoting efficient air circulation. The plenum acts as a channel for air movement, reducing the risk of stagnant air and fostering a healthier environment, particularly crucial in spaces like data centers.
 

4.Versatility in Applications

Whether it's an office, data center, cleanroom, or laboratory, steel raised floors adapt seamlessly to various applications. Their versatility makes them a preferred choice in diverse industries where the need for adaptable and functional spaces is paramount.

In essence, steel raised floors serve as a foundation for innovation in design and functionality, offering a dynamic solution that addresses the evolving demands of modern architecture.

In the fourth part of our series on steel raised floors, we embark on a comparative analysis, pitting these innovative flooring solutions against traditional alternatives. By examining factors such as installation, maintenance, and adaptability, we aim to showcase the distinct advantages that set steel raised floors apart.
 

1. Installation Process: Speed and Efficiency

When it comes to the installation process, steel raised floors stand out for their speed and efficiency. Traditional flooring methods often involve time-consuming processes, including the curing of adhesives and setting times for materials. In contrast, steel raised floors, with their modular design, can be installed more swiftly, minimizing construction timelines and reducing associated costs.
 

2. Flexibility and Customization

One of the defining features of steel raised floors is their flexibility and customization capabilities. Traditional flooring methods, such as glued-down carpeting or hardwood, lack the adaptability needed for dynamic environments. Steel raised floors, with their modular panels, allow for easy reconfiguration to meet changing needs, providing a level of versatility unmatched by traditional alternatives.
 

3. Accessibility for Maintenance and Upgrades

Maintenance considerations play a crucial role in flooring choices. Traditional flooring, when damaged or requiring maintenance, often involves extensive and intrusive procedures. Steel raised floors, on the other hand, excel in this aspect. The plenum space beneath allows for easy access to underlying infrastructure, simplifying maintenance procedures and reducing downtime.
 

4. Cost Considerations and Long-Term Savings

While the initial cost of steel raised floors may seem higher than some traditional flooring options, it's essential to consider the long-term savings they offer. The efficiency of installation, reduced maintenance costs, and adaptability contribute to a higher return on investment over the life of the building.
 

5. Environmental Impact

In an era where sustainability is a top priority, the environmental impact of flooring choices cannot be overlooked. Traditional flooring materials may involve adhesives and finishes with volatile organic compounds (VOCs), contributing to indoor air pollution. Steel raised floors, with their focus on improved indoor air quality, align with sustainable building practices.

This comparative analysis underscores the distinct advantages of steel raised floors over traditional flooring methods, positioning them as a forward-thinking and practical choice for modern construction and design.

T/T,L/C, Western Union and so on.

Packed in wooden pallet, covered with plastic paper.

30 days after receiving the prepayment.

1100-1500pieces, depending on the raised floor type.

ISO certification, KS certification,Static report,QAS report,VOC report,CISCA report,MOB report.SGS report.

100 pieces each type

Yes, free samples will be provided to you according to your detailed requirement

Our products include bare steel raised floors, laminated steel raised floors, calcium sulfate raised floors, aluminum raised floors, wood core raised floors PVC/Vinyl floors,FRC/GRC raised floor,glass raised floor, etc. We also supply airflow panels, raised floor stringers, air diffusers, bush grommets, outlet boxes,raised floor-cutting machines, and raised floor fan.

We are a direct manufacturer, and our price is very competitive.

Plastic adjustable pedestals are typically made from high-quality polypropylene (PP) or recycled plastics to ensure durability and environmental sustainability. These materials are UV-resistant, corrosion-proof, and capable of withstanding extreme weather conditions, making them ideal for outdoor applications like rooftop decks, pavers, and landscaping.

The production involves injection molding, where molten plastic is shaped into precision components. Advanced molding techniques ensure uniformity in load-bearing surfaces and threaded adjustment mechanisms. Quality control tests, such as stress resistance and UV stability checks, are conducted to meet international standards .

Our pedestals are engineered to support 1500-2500 kg per unit, depending on the model and design. They distribute weight evenly, preventing surface damage to tiles or decking. For heavy-duty applications, reinforced models with thicker bases and enhanced thread systems are available.

Adjustability: Height ranges from 10 mm to 1,200 mm, allowing precise leveling on uneven surfaces.
Weather Resistance: Resists moisture, frost, and UV degradation, ensuring long-term stability.
Lightweight & Easy Installation: simply screw the pedestal to the desired height.
Eco-Friendly: Made from recyclable materials, reducing environmental impact.

They are ideal for:
Rooftop decks and terraces
Paving systems (e.g., stone, porcelain, or composite tiles)
Green roofs and raised garden beds
Commercial landscapes and public plazas.

With proper installation, these pedestals have a 15-30 year lifespan under normal conditions. UV-stabilized materials prevent brittleness, while corrosion-resistant designs maintain structural integrity in humid or saline environments.

Minimal maintenance is needed. Periodically check for debris buildup and clean with water to ensure drainage efficiency. Avoid using harsh chemicals that could degrade the plastic.

Yes. The materials are tested to withstand temperatures as low as -30°C without cracking.